Dimensions
Length with Bucket
10.61 ft in
Width Over Tires
5.01 ft in
Height to Top of Cab
6.4 ft in
Wheelbase
3.24 ft in
Ground Clearance
8 in
Length w/o Bucket
8.27 ft in
Clearance at Max Lift and Dump
7.12 ft in
Reach at Max Lift and Dump
22.05 in
 
Specifications
Engine
Number of Cylinders
4
Engine Make
2236
Engine Model
3034
Gross Power
58 hp
Net Power
54 hp
Power Measured @
2600 rpm
Displacement
183 cu in
Bore
3.9 in
Stroke
4 in
Engine Model
Cat 3034C
Net Flywheel Power
41 hp
 
Operational
Operational Weight
6070 lb
Fuel Capacity
17.2 gal
Hydraulic System Fluid Capacity
14.6 gal
Operating Speed
6.9 mph
Max Speed
6.9 mph
 
Weights
Operating Weight
5843 lb
Loader
Operating Load Rating
1500 lb
Tipping Angle
2800 degrees
Bucket Capacity
0.6 yd3
 
Hydraulic System
Loader Hydraulic Pressure
3300 psi
Loader Hydraulic Flow
30 gal/min
Hydraulic Flow
Standard flow
 
Hydraulic
Pump Flow Capacity
30.2 gal/min
Dimensions
Length with Bucket
10.7 ft in
Length w/o Bucket
8.3 ft in
Width Over Tires
5.1 ft in
Height to Top of Cab
6.4 ft in
Clearance at Max Lift and Dump
7.2 ft in
Wheelbase
3.3 ft in
Ground Clearance
8 in
Reach at Max Lift and Dump
22.1 in
Turning Radius from Center - inc bucket
80.7 in
Wheel Base
3.3 ft in
Bucket Pin Height - Maximum Lift
9.4 ft in
Height - Top of Cab
6.5 ft in
Length - Without Bucket
99 in
Length - With Bucket on Ground
127 in
Maximum Overall Height
146 in
Bucket Pin Height - Carry Position
9 in
Clearance at Maximum Lift and Dump
84 in
Reach - Maximum Lift/Dump
20 in
Vehicle Width over Tires
60 in
Bumper Overhang - Rear Axle
38 in
 
Operating Specifications
Rated Operating Capacity with Optional Counterweight
1600 lb
Tipping Load
3000 lb
Breakout Force - Tilt Cylinder
3907 lb
Breakout Force - Lift Cylinder
3129 lb
Rated Operating Capacity
1500 lb
 
Service Refill Capacities
Cooling System
2.6 gal
Fuel Tank
17 gal
Hydraulic Tank
9.2 gal
Engine Crankcase
1.8 gal
Hydraulic System
14.5 gal
Chain Box - Each Side
1.6 gal
 
Cab
ROPS
SAE J1040 MAY94 and ISO3471:1994
FOPS
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
 
 
 
 
Spec Source: https://www.ritchiespecs.com/model/caterpillar-228-skid-steer-loader