Dimensions
Length with Bucket
12.5 ft in
Width Over Tires
5.5 ft in
Height to Top of Cab
6.83 ft in
Wheelbase
4.5 ft in
Ground Clearance
8.81 in
Length w/o Bucket
10.71 ft in
Clearance at Max Lift and Dump
8.16 ft in
Reach at Max Lift and Dump
30 in
Specifications
Engine
Number of Cylinders
4
Engine Make
2236
Engine Model
3044C DIT
Gross Power
94 hp
Net Power
90 hp
Power Measured @
2500 rpm
Displacement
201 cu in
Bore
3.7 in
Stroke
4.7 in
Gross Power - SAE J1995
94 hp
Engine Model
Cat C3.4 DIT
Engine Power - ISO 14396
93 hp
Net Power - EEC 80/1269
91 hp
Net Power - ISO 9249 EEC
91 hp
Net Power - SAE 1349
90 hp
Net Flywheel Power
90 hp
Operational
Operational Weight
8292 lb
Fuel Capacity
26 gal
Cooling System Fluid Capacity
3.7 gal
Engine Oil Fluid Capacity
2.6 gal
Hydraulic System Fluid Capacity
15 gal
Chain Box Fluid Capacity - each side
2.9 gal
Max Speed
7.2 mph
Operating Voltage
12 V
Alternator Supplied Amperage
90 amps
Power Train
Travel Speed Forward
7.2 mph
Travel Speed Reverse
7.2 mph
Travel Speed Reverse - 2-Speed Option
10 mph
Travel Speed Forward - 2-Speed Option
10 mph
XDP Option Speed - With Tires
6 mph
XDP Option Speed - With VTS Tracks
4.7 mph
Weights
Operating Weight
8362 lb
Loader
Breakout Force
7315
Operating Load Rating
3250 lb
Tipping Angle
6500 degrees
Bucket Capacity
0.6 yd3
Hydraulic System
Hydraulic Flow (1)
Standard
Hydraulic Power
42.8 hp
Maximum Loader Hydraulic Flow
33 gal/min
Maximum Loader Hydraulic Pressure
4061 psi
Loader Hydraulic Pressure
3335 psi
Loader Hydraulic Flow
22 gal/min
Hydraulic Flow (2)
High Flow XPS
Hydraulic
Pump Flow Capacity
22 gal/min
Relief Valve Pressure
3335 psi
Dimensions
Length with Bucket
12.5 ft in
Length w/o Bucket
10.8 ft in
Width Over Tires
5.5 ft in
Height to Top of Cab
6.9 ft in
Clearance at Max Lift and Dump
8.2 ft in
Wheelbase
4.5 ft in
Ground Clearance
8.8 in
Reach at Max Lift and Dump
30 in
Turning Radius from Center - machine rear
58.3 in
Turning Radius from Center - inc bucket
101.5 in
Wheel Base
4.6 ft in
Bucket Pin Height - Maximum Lift
10.8 ft in
Height - Top of Cab
6.9 ft in
Length - Without Bucket
122.8 in
Length - With Bucket on Ground
150.9 in
Maximum Overall Height
162 in
Bucket Pin Height - Carry Position
7.8 in
Clearance at Maximum Lift and Dump
97.9 in
Departure Angle
26 degrees
Maximum Dump Angle
51 degrees
Rack Back Angle - Maximum Height
83 degrees
Turn Radius from Center - Rear
70.7 in
Turn Radius from Center - Coupler
57.1 in
Turn Radius from Center - Bucket
89.1 in
Maximum Reach - With Arms Parallel
50 in
Bucket Pin Reach - Maximum Lift
14.7 in
Reach - Maximum Lift/Dump
30.1 in
Vehicle Width over Tires
66 in
Bumper Overhang - Rear Axle
42.8 in
Operating Specifications
Rated Operating Capacity with Optional Counterweight
3480 lb
Tipping Load
6500 lb
Breakout Force - Tilt Cylinder
7315 lb
Rated Operating Capacity
3250 lb
Service Refill Capacities
Cooling System
3.7 gal
Fuel Tank
26 gal
Hydraulic Tank
11 gal
Engine Crankcase
2.6 gal
Hydraulic System
15 gal
Chain Box - Each Side
2.9 gal
Cab
ROPS
SAE J1040 MAY94, ISO 3471:1994
FOPS
SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II
SAE J231 JAN81, ISO 3449:1992 Level II
Spec Source: https://www.ritchiespecs.com/model/caterpillar-272c-skid-steer-loader